How to make leather belt?
The belt is the most important part of men’s accessories. Because there are 2 accessories used by men. One is a watch and the other is a belt. Therefore, these accessories must be manufactured from special and valuable parts. When buying a leather belt, a man should give the most attention to the size and shape of his buckle. Because the belt buckle is the most important part that reflects the nobility and elegance of the buckle. The belt buckle should not be too large and should match the style of your clothing. For example, the suit and leather belt look quite stylish. The leather belt must have a classic belt buckle. eykametal.com/product/classic-belt-buckles In this way, your clothes will be quite stylish combination. Now let’s talk about how to make leather belt.
I want to give you some information about leather belt making. The belt is a waistband made of fabric, leather or metal which is fastened with a buckle around the waist. It can be produced depending on the garments or it can be used for accessory purposes independently of the garments. The elements that make up a belt are the belt buckle, which can change shape and characteristics due to the fashion phenomenon, and the holes drilled on it to grasp the waist in the most comfortable way. eykametal.com
Since the Bronze Age, the belt has been used for both women and men. Until the Middle Ages, women’s clothing has been less in proportion to men, but since then, belts have emerged for both women and men.
First of all, let us introduce the parts of the leather belt;
Parts of Leather Belt
- Body
It is the main part of the belt in the form of a strip between the buckle and the end. This gives the finished width and length of the belt. It is measured according to model feature and body size (waist size) of the user.
- Threshold
It is the part where the waist adjustment holes are drilled after the waist size of the belt. The tip is generally curved. Depending on the model feature, tip shapes may vary.
The first hole where the buckle tongue will pass 10 cm from the belt end is marked. 5 holes are marked in sequence. The standard distance between the holes is 2.5-3 cm. The standard 5 holes in the belt up to the 3rd hole are referred to as tip.
- Buckle
It is the part of the body to be attached to the buckle. In manual cutting; Instead of the buckle, the buckle stabilizer is used to locate the staple. Standard buckle length measures 10 cm. d. Waist size, 5 cm. body is measured by adding.
The buckle piece includes buckle holes (4 holes) and two bridge holes for securing two bridges.
- Bridge
It is the part of the belt that holds the tip. It is placed in the buckle section. According to the width of the belt standard dimensions, the body is made of material used. Some models are combined with buckle and bridge.
- Buckle
It is a fastening piece that can be produced in a variety of materials and in different models and which makes the belt stand on the waist without slipping.
Points to Consider in Belt Size
- Tape measure or non-stretching light colored ribbon should be used to measure waist.
- The waist should be allowed to move (2 fingers).
- The person should be in a natural position while taking the waist measurement.
- Dimensions should not be tight or plentiful.
- Appropriate measuring tools should be used.
- Edge burrs of the part to be measured must be cleaned.
- The instrument must be used with precision.
- The measuring instrument must not be worn for accurate measurement.
- It is necessary to use a caliper when measuring thickness, depth and width.
Leather Belt Hand Cutting Points
- The cutting blade should be sharp.
- The cutting table should be smooth.
- Surface survey of the skin should be done.
- The mold should be placed economically on the faultless part of the skin.
- Cutting straight parts should be done with steel ruler.
- Weight should be placed on the molds to prevent slipping.
- Be careful against cutting knife risks when cutting.
- It should be remembered that the cost of leather is high.
As you can see, making leather belts requires mastery. Use ingenious materials and produce in a skillful way. In addition, the area where the belt buckle will be positioned in production should be selected correctly. Eyka Metal is one of the Turkey’s best belt buckle manufacturer for more information please contact us.. eykametal.com/belt-buckle-manufacturers
For more; eykametal.com/contact-us